Aimants de soudage
Meilleurs aimants de soudage à flèche triangulaire tenant des supports de soudure Hot Seller sur Amazon
- Maintient le matériau à 45, 90, 135 et 180 degrés pour tous les types de soudage.
- Forte force magnétique, forte adsorption.
- Libérez vos mains pour un travail complet plus sûr et plus rapide.
- Fabriqué en acier inoxydable de haute qualité avec une finition enduite de poudre, durable et prolonge la durée de vie.
- Portez des lunettes de protection dans la zone de travail et éloignez-les des enfants.
- détails du produit
- Exhibition
- Certificat
| Description du produit | ||||
| Plus de choix pour vous : Maison > À propos de nous | ||||
| Nom du produit | Meilleur vendeur chaud d'aimants de soudage à flèche triangulaire sur Amazon | |||
| Matériel | Aimant et Acier | |||
| Application | Les supports de soudage magnétiques sont pratiques pour souder, assembler, marquer ou installer des tuyaux, etc. | |||
| Angle applicable | 45°/90°/135°/180° | |||
| Forfait | Une pièce sous blister double PVC | |||
| Taille du produit | |||||
| Modèle | Longueur (cm) | Largeur (cm) | Hauteur (cm) | Gravité nette d'adsorption | Poids net |
| Grand | 19 | 12.2 | 2.6 | 75LBS 33Kg | 1 kg |
| Moyen | 15.5 | 10 | 1.7 | 50LBS 22Kg | 0.55Kg |
| Petit | 12 | 8.3 | 1.4 | 25LBS 12Kg | 0.31Kg |
Produits connexes
Frequently Asked Questions
Q: How to Use Welding Magnets?
A: Welding magnets are used to hold metal workpieces in position during welding, assembly, or layout tasks. To use them, place the magnet at the joint area to secure parts at the required angle, such as 45°, 90°, or 135°. Ensure the contact surfaces are clean and free from debris to achieve proper magnetic holding force and alignment accuracy.
Q: How Strong is a Welding Magnet?
A: The strength of a welding magnet depends on its size, design, and magnetic material. Industrial welding magnets can typically hold from a few kilograms up to several dozen kilograms of steel components. Holding capacity is usually specified by the manufacturer and may vary based on surface condition, material thickness, and positioning.
Q: How to Weld Magnetized Pipe?
A: When welding magnetized pipe, it is important to first reduce or neutralize the magnetic field, as magnetism can cause arc blow and unstable welds. This can be done by demagnetizing the pipe using specialized equipment or by repositioning grounding clamps. Proper joint preparation and controlled welding parameters help ensure consistent weld quality.
Q: Can you Weld a Magnet?
A: Directly welding a permanent magnet is generally not recommended. The high heat generated during welding can damage the magnetic properties and structural integrity of the magnet. If magnets must be used in welded assemblies, they are typically installed after the welding process is completed.
Q: Can Magnets be Welded?
A: Most permanent magnets are not suitable for welding due to their sensitivity to heat and potential for demagnetization. In industrial applications, magnets are usually attached using mechanical fastening, adhesives, or integrated mounting systems rather than welding methods.
Q: How to Use a Magnetic Welding Square?
A: A magnetic welding square is used to hold metal parts at precise angles during fabrication. To use it, position the square at the joint corner and align the workpieces against its flat surfaces. Confirm the angle and stability before starting the weld. After tack welding, remove the magnetic square to avoid interference with the welding arc.