SDS Chisel Drill

SDS Plus Chisel Flat Point Grooving Cold Hammer Removering Plaster from Walls and Floors

  • SDS Plus Chisel for electric rotary hammers specially designed for durability and efficiency.
  • Ground tip, fully tempered and laser engraved exact chuck fit.
  • For general-purpose chipping and demolition works in brickwork, concrete, and rock.
  • Gives a well-directed off effect.

Product Description

More Choice For You: Home > SDS Chisel
Product Name SDS Plus Chisel Flat Point Grooving Cold Hammer Removering Plaster from Walls and Floors
Material 40Cr Steel with Heat Treatment
Process Forged
Head Type Flat, Point, Gouge (We Also have Wide, Spade etc)

Shank

SDS Plus Shank (We Also have SDS Max Shank, PH65 Shank, Pneumatic Collared Shank, 17mm A/F Shank)
Surface Finish Sand Blasted
Package One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Feature

1. Made of premium 40Cr steel, very sturdy for long using life.
2. Suitable for all SDS plus drills.
3. Could satisfy all your different working or renovation needs.
4. The use of high performance alloy steel material with good seismic resistance.
5.  Great tools to break or drill a wall, concrete, stone or other materials.

Product Size
SDS Plus Chisel  Chisel SDS Plus Shank
Item Head Diameter (mm) Total Length (mm) Picture
Point Chisel / 140  SDS Plus Point Chisel
250
Flat Chisel 20 140  20mm SDS Plus Flat Chisel
250
40 140  40mm SDS Plus Flat Chisel
250
Flat Sharpen Chisel 20 250  SDS Plus Flat Sharpen Chisel
Cranked Wide Chisel 40 250  SDS Plus Cranked Wide Chisel
Hollow Gouge Chisel 22 250  SDS Plus Hollow Gouge Chisel
Winged Gouge Chisel 22 250  SDS Plus Winged Gouge Chisel
Channel Chisel 22 250  SDS Plus Channel Chisel
Slotting Chisel 27 250  SDS Plus Slotting Chisel
Groove Edge 32 130  130mm SDS Plus Groove Edge
200  200mm SDS Plus Groove Edge
Tile Chisel 40 260  SDS Plus Tile Chisel
Spade Chisel 40 250  SDS Plus Spade Chisel
Wide Chisel 75 165  SDS Plus Wide Chisel
250
Wide Bend 15° Chisel 75 165  SDS Plus Wide Bend 15° Chisel
250
* Custom-tailor would be available against customers’ requirements

Factory

SDS Plus Electric Hammer Drill Bits Groove Chisel

1. Moil Point Breaker Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.

2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.

3. Gouge Chisel is ideal for cutting narrow channels into the concrete.

4. Fully heat treatment improves core strength for maximum durability and extended life.

5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity

6.Compatible with all SDS-Plus style chucks.

 

SDS Plus Electric Hammer Drill Bits Groove Chisel

1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.

How to Use SDS Plus Electric Hammer Drill Bits Groove Chisel :

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x