SDS Tile Chisel

17mm A/F Hex Shank SDS Hammer Flat Chisel Bits for Breaker Masonry Wall

1. Material:40Cr Steel with Heat Treatment

2. Process: Forged

3. Head Type: 20mm Flat

4. Shank : 17mm Hex Shank

5.Surface Finish: Sand Blasted

6.Package: One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch

Product Description
More Choice For You: HomeChisel
Product Name
17mm A/F Hex Shank SDS Hammer Flat Chisel Bits for Breaker Masonry Wall
Material
40Cr Steel with Heat Treatment
Process
Forged
Head Type
Wide (We Also have Point, Point Spade, Spade)
Shank
17mm A/F Hex Shank (We Also have SDS Plus Shank, SDS Max Shank, Pneumatic Collared Shank, Ph65 Shank, etc)
Surface Finish
Sand Blasted
Package
One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Feature

1. Chisels are heat-treated and forged for unmatched strength and longevity, with its sharp edge design for maximum masonry impact.

2. Made of premium 40Cr steel, very sturdy for long using life.
3. It can easy to removes tile and concrete.
4. Designed for chipping, scaling and large area surface removal.
5. It can save your time, chisel special design and big size allow for quick chiseling and breaking concrete.
Product Size
17mm A/F Hex Shank  17mm AF Hex Shank Chisel
Item Head Diameter (mm) Total Length (mm) Picture
Point Chisel / 280-600  17mm A/F Hex Shank Point Chisel
Flat Chisel 22 280-600  17mm A/F Hex Shank Flat Chisel
Wide Chisel 50 280  17mm A/F Hex Shank 50mm Wide Chisel
Wide Chisel 75 280  17mm A/F Hex Shank 75mm Wide Chisel
Pointed Spade Chisel 100 450  17mm A/F Hex Shank Pointed Spade Chisel
* Custom-tailor would be available against customers’ requirements

Factory

1. Moil Point Breaker Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.

2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.

3. Gouge Chisel is ideal for cutting narrow channels into the concrete.

4. Fully heat treatment improves core strength for maximum durability and extended life.

5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity

6.Compatible with all SDS-Plus style chucks.

1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

Related Products

en_USEnglish
Scroll to Top

Get a Quick Quote!

x