Bull Point Chisel

Bull Point SDS Plus Chisel Bits for Concrete Stone Masonry

1. Material:40Cr Steel with Heat Treatment

2. Process: Forged

3. Head Type: point, Flat, Gouge, Wide, Spade, etc. are available

4. Shank: 17mm Hex Shank

5. Surface Finish: Sand Blasted

6.Package: One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch

Product Description
More Choice For You: HomeChisel
Product Name
Bull Point SDS Plus Chisel Bits for Concrete Stone Masonry
Material
40Cr Steel with Heat Treatment
Process
Forged
Head Type
Point (We Also have Flat, Wide, Gouge, Spade)
Shank
SDS Plus Shank (We Also have SDS Max Shank, PH65 Shank, Pneumatic Collared Shank, 17mm A/F Shank, etc)
Surface Finish
Sand Blasted
Package
One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Feature

1. Professional quality for efficient and fast hammer drilling in hard materials like concrete, granite, brick and other similar building materials.

2. Premium carbon steel with heat treatment improves core strength for maximum durability and extended life.
3. Hardened, premium carbide insert tip is strong and stays sharp longer for finer material break up and easier drilling increases strength and durability.
4. Copper braze material gives high heat resistance for reduced tip loss, carbide tip securely embedded in the steel body.
5. Wear mark identifies when the bit has worn to an inappropriate level for precision anchoring.
6. Compatible with all SDS-Plus style chucks.
Product Size
SDS Plus Chisel  Chisel SDS Plus Shank
Item Head Diameter (mm) Total Length (mm) Picture
Point Chisel / 140  SDS Plus Point Chisel
250
Flat Chisel 20 140  20mm SDS Plus Flat Chisel
250
40 140  40mm SDS Plus Flat Chisel
250
Flat Sharpen Chisel 20 250  SDS Plus Flat Sharpen Chisel
Cranked Wide Chisel 40 250  SDS Plus Cranked Wide Chisel
Hollow Gouge Chisel 22 250  SDS Plus Hollow Gouge Chisel
Winged Gouge Chisel 22 250  SDS Plus Winged Gouge Chisel
Channel Chisel 22 250  SDS Plus Channel Chisel
Slotting Chisel 27 250  SDS Plus Slotting Chisel
Groove Edge 32 130  130mm SDS Plus Groove Edge
200  200mm SDS Plus Groove Edge
Tile Chisel 40 260  SDS Plus Tile Chisel
Spade Chisel 40 250  SDS Plus Spade Chisel
Wide Chisel 75 165  SDS Plus Wide Chisel
250
Wide Bend 15° Chisel 75 165  SDS Plus Wide Bend 15° Chisel
250
* Custom-tailor would be available against customers’ requirements

Factory

1. Moil Point Breaker Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.

2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.

3. Gouge Chisel is ideal for cutting narrow channels into the concrete.

4. Fully heat treatment improves core strength for maximum durability and extended life.

5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity

6.Compatible with all SDS-Plus style chucks.

1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

Related Products

en_USEnglish
Scroll to Top

Get a Quick Quote!

x