Hss Reduced Shank Drill Bit

HSS Drill Bits with Turbo Max Point and 1/2 inch Straight Shank

  • Material: Cobalt 5% M35 (HSS 4241 4341 6542-M2 is Available)
  • Process: Milled (Roll Forged is Available)
  • Standard: DIN345 (ANSI, DIN341, and DIN1870 are Also Available)Size MT No.: No.1 to No.6
  • Size diameter:7.5mm-100mm and 3/8″ to 4″
  • Flute Type: Type N, Right-Hand Cutting
  • Point Angle:118 Degree (135 Degree Split Point, Thinning Point are Available)
  • Surface Finish: Amber Color (Black Oxide, Gray & Bright, Black & White, Bright, Titanium Coating are Also available)
  • Package: One Piece in Paper Box, Plastic Box, Wood Box.
Product Description
More Choice For YouHome > HSS Drill Bit
Product Name
HSS Drill Bits with Turbo Max Point and 1/2 inch Straight Shank
Material
HSS Cobalt ( M35 HSS-E HSS-Co5% )
Process
Fully Ground (Also have Rolled & Polished, Rolled, Milled)
Size
1-20mm
Point Type
135/118 Degree Split Point
Shank Type
1/2″ Reduced Shank
Helix Angle
Regular Spiral Type N (Also have Slow Spiral Type H, Fast Spiral Type W, Left Hand Spiral)
Surface Finish
Black Oxide (Also have Bright, Amber Color, Black & Gold, Titanium, Black & Bright)
Package
As your Required
Product Size
Black Smith Reducerd Shank 10mm, 13mm
Diameter(mm) Flute Length(mm) Overall Length(mm) Shank Diameter(mm) Diameter(mm) Flute Length(mm) Overall Length(mm) Shank Diameter(mm)
10.5 87 133 10.0 20 140 205 10.0
11.0 94 142 10.0 13.5 108 160 13.0
11.5 94 142 10.0 14.0 108 160 13.0
12.0 101 151 10.0 14.5 114 169 13.0
12.5 101 151 10.0 15.0 114 169 13.0
13.0 101 151 10.0 15.5 120 178 13.0
13.5 108 160 10.0 16.0 120 178 13.0
14.0 108 160 10.0 16.5 125 184 13.0
14.5 114 169 10.0 17.0 125 184 13.0
15.0 114 169 10.0 17.5 130 191 13.0
15.5 120 178 10.0 18.0 130 191 13.0
16.0 120 178 10.0 18.5 135 198 13.0
16.5 125 184 10.0 19.0 135 198 13.0
17.0 125 184 10.0 19.5 140 205 13.0
18.0 130 191 10.0 20 140 205 13.0
Silver & Deming 1/2″ Reduced Shank
Diameter(Inch) Flute Length(Inch) Overall Length(Inch) Diameter(Inch) Flute Length(Inch) Overall Length(Inch)
33/64″ 3″ 6″ 55/64″ 3″ 6″
17/32″ 3″ 6″ 7/8″ 3″ 6″
35/64″ 3″ 6″ 57/64″ 3″ 6″
9/16″ 3″ 6″ 29/32″ 3″ 6″
37/64″ 3″ 6″ 59/64″ 3″ 6″
19/32″ 3″ 6″ 15/16″ 3″ 6″
39/64″ 3″ 6″ 61/64″ 3″ 6″
5/8″ 3″ 6″ 31/32″ 3″ 6″
41/64″ 3″ 6″ 63/64″ 3″ 6″
21/32″ 3″ 6″ 1″ 3″ 6″
43/64″ 3″ 6″ 1-1/64″ 3″ 6″
11/16″ 3″ 6″ 1-1/32″ 3″ 6″
45/64″ 3″ 6″ 1-1/16″ 3″ 6″
23/32″ 3″ 6″ 1-3/32″ 3″ 6″
47/64″ 3″ 6″ 1-1/8″ 3″ 6″
3/4″ 3″ 6″ 1-5/32″ 3″ 6″
49/64″ 3″ 6″ 1-3/16″ 3″ 6″
25/32″ 3″ 6″ 1-1/4″ 3″ 6″
51/64″ 3″ 6″ 1-5/16″ 3″ 6″
13/16″ 3″ 6″ 1-3/8″ 3″ 6″
53/64″ 3″ 6″ 1-7/16″ 3″ 6″
27/32″ 3″ 6″ 1-1/2″ 3″ 6″
* Custom-tailor would be available against customers’ requirements

Factory

1. Widen teeth segments for quick material removal
2. Optimized bond and formula for longer life
3. Optimized segment height minimizes dust and debris
4. Surface finishing on concrete, screed, and natural stone

 

1. Precise dimension, long life, and high efficiency.

2. High-speed steel (HSS) provides hardness for wear resistance.

3. HSS Cobalt: Extremely hard and dissipate heat quickly. They are most commonly used for boring in stainless steel and other metals.

4. Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point and maintains a sharp cutting edge.

5. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

6. When running in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.

7. Designed to perform in a broad range of materials in the iron and steel families.

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x