SDS Gouge Chisel

SDS Plus Electric Hammer Drill Bits Groove Chisel for Cutting Narrow Channels Into Concrete

  • SDS Plus Electric Hammer Drill Bits Groove Chisel
  • 1. Material:40Cr Steel with Heat Treatment
  • 2. Process: Forged
  • 3. Head Type: Groove
  • 4. Shank: SDS Plus Shank
  • 5. Surface Finish: Sand Blasted
  • 6. Hardness:47-50HRC
  • 7. Package: One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Product Description
More Choice For You: Home > SDS Chisel
Product Name
SDS Plus Electric Hammer Drill Bits Groove Chisel for Cutting Narrow Channels Into Concrete
Material
40Cr Steel with Heat Treatment
Process
Forged
Head Type
Groove (We Also have Point, Flat, Wide, Clay Spade, etc)
Shank
SDS Plus Shank (We Also have SDS Max Shank, Ph65 Shank, Pneumatic Collared Shank, 17mm A/F Shank, etc)
Surface Finish
Sand Blasted
Package
One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Feature

1. SDS Plus chisel Highest tool quality, very long life service.

2. High-quality hardening steel, special hardening process, surface protection minimizing wearing and tearing.
3. The surface protection can minimize wear and extend the use time.
4. High removal rate due to design and cutting edge geometry.
5. Gouge SDS Plus Chisel for precise insertion of narrow channels in concrete, and renovation work.
Product Size
SDS Plus Chisel  Chisel SDS Plus Shank
Item Head Diameter (mm) Total Length (mm) Picture
Point Chisel / 140  SDS Plus Point Chisel
250
Flat Chisel 20 140  20mm SDS Plus Flat Chisel
250
40 140  40mm SDS Plus Flat Chisel
250
Flat Sharpen Chisel 20 250  SDS Plus Flat Sharpen Chisel
Cranked Wide Chisel 40 250  SDS Plus Cranked Wide Chisel
Hollow Gouge Chisel 22 250  SDS Plus Hollow Gouge Chisel
Winged Gouge Chisel 22 250  SDS Plus Winged Gouge Chisel
Channel Chisel 22 250  SDS Plus Channel Chisel
Slotting Chisel 27 250  SDS Plus Slotting Chisel
Groove Edge 32 130  130mm SDS Plus Groove Edge
200  200mm SDS Plus Groove Edge
Tile Chisel 40 260  SDS Plus Tile Chisel
Spade Chisel 40 250  SDS Plus Spade Chisel
Wide Chisel 75 165  SDS Plus Wide Chisel
250
Wide Bend 15° Chisel 75 165  SDS Plus Wide Bend 15° Chisel
250
* Custom-tailor would be available against customers’ requirements

SDS Plus Electric Hammer Drill Bits Groove Chisel

1. Moil Point Breaker Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.

2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.

3. Gouge Chisel is ideal for cutting narrow channels into the concrete.

4. Fully heat treatment improves core strength for maximum durability and extended life.

5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity

6.Compatible with all SDS-Plus style chucks.

 

SDS Plus Electric Hammer Drill Bits Groove Chisel

1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.

How to Use SDS Plus Electric Hammer Drill Bits Groove Chisel :

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x