SDS Max Flat Chisel

SDS Max Electric Hammer Flat Chisel for Concrete Wall Stone

1. Material:40Cr Steel with Heat Treatment

2. Process: Forged

3. Head Type: Flat 20 × 250 mm

4. Shank : SDS Plus Shank

5.Surface Finish: Sand Blasted

6.Hardness:47-50HRC

7.Package: One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch

Product Description
More Choice For You: HomeChisel
Product Name
SDS Max Electric Hammer Flat Chisel for Concrete Wall Stone
Material
40Cr Steel
Process
Forged
Head Type
Flat Chisel
Shank
SDS Max Shank
Surface Finish
Sand Blasted
Package
One Piece in One Plastic Hanger Or In One PVC Tube or PVC Pouch
Feature

1. Chisel drill bit is made of chromium-vanadium steel material.

2. Avoid breakage, and can resist wear, oxidation, and corrosion.
3. Allow the bit to slide in the chuck and enhance the hammering action of the tool.
4. Gives continuously effective braking on various masonry objects, such as brick, concrete, stone, tiles, hollow brick
5. The surface of the SDS Max chisel is processed rough, increasing toughness and hardness, and reducing wear to a greater extent.
Product Size
SDS Max Chisel  Chisel SDS Max Shank
Item Head Diameter (mm) Total Length (mm) Picture
Point Chisel / 280-600  SDS Max Point Chisel
Flat Chisel 25 280-600  SDS Max Flat Chisel
Wide Chisel 50 400  SDS Max 50mm Wide Chisel
75 300  SDS Max 75mm Wide Chisel
80 300  SDS Max 80mm Wide Chisel
115 350  SDS Max 115mm Wide Chisel
Wide Bend 15°Chisel 75 300  SDS Max Wide Bend 15°Chisel
Tile Chisel 50 300  SDS Max Tile Chisel
Hollow Gouge Chisel 26 300  SDS Max Hollow Gouge Chisel
Channel Chisel 33 300  SDS Max Channel Chisel
Winged Gouge Chisel 35 380  SDS Max Winged Gouge Chisel
Clay Spade Chisel 110 450  SDS Max Clay Spade Chisel
Pointed Spade Chisel 100 450  SDS Max Pointed Spade Chisel
Asphalt Cutter Chisel 125 450  SDS Max Asphalt Cutter Chisel
Mortar Chisel 27 300  SDS Max Mortar Chisel
Slotting Chisel 27 300  SDS Max Slotting Chisel
Bushing Chisel 45 240  SDS Max Bushing Chisel
Comb Holder Chisel / 300  SDS Max Comb Holder Chisel
* Custom-tailor would be available against customers’ requirements

Factory

1.Flat 20 × 250 mm Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.

2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.

3. Gouge Chisel is ideal for cutting narrow channels into the concrete.

4. Fully heat treatment improves core strength for maximum durability and extended life.

5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity

6.Compatible with all SDS-Plus style chucks.

1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

Related Products

en_USEnglish
Scroll to Top

Get a Quick Quote!

x