Short Spade Bit

Flat Wood Spade Drill Bits Hex Shank Short Length Stubby for Confined Space Drilling Wood

  • Drills holes 2X faster. More Holes. Less Time.
  • Lasts 2X Longer ​to get more done.
  • Chamfered cutting edges for increased durability.
  • The groove for faster chip removal.
  • Full-length heat treatment guards against bending bit in heavy-duty applications.

 

Product Description
More Choice For You: Home > Wood Drill Bit
Product Name
Short Length Quick Change Hex Shank Tri- Point Stubby Flat Wood Spade Drill Bit for Wood Drilling Hole
Material
High Carbon Steel with Heat Treatment
Shank Type
Quick Change Hex Shank (Hex Shank is available)
Head Tip
Tri-Point (We Also Have Center Point and Tri-Point with Cutting Groove)
Surface Finish
Bright (We Also Have Black Oxide and Titanium Coating)
Package
One Piece in One PVC Pouch or PVC Skin Card or Paper Sandwich or PVC Double Blister
Product Size
Overall Length 101mm/152mm/304mm/406mm
Diameter mm 6 8 10 11 12 13 14 16 18 19 20 22
24 25 26 28 30 32 34 35 36 38 40
Overall Length 4″/6″/12″/16″
Diameter Inch 1/4″ 5/16″ 3/8″ 7/16″ / 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 13/16″ 7/8″
15/16″ 1″ / 1-1/8″ 1-3/16″ 1-1/4″ / 1-3/8″ / 1-1/2″ 1-9/16″
* Custom-tailor would be available against customers’ requirements

 

 

1. Expert Quality, manufactured from 45# special carbon steel hardened and tempered.

2. Full-length heat treatment guards against bending bit in heavy-duty applications.

3. The precision ground central point with optimized design for faster cutting performance.

4. Double cutting spurs scribe the outside of the hole reducing breakout.

5. Quick-change shank reduces slipping in standard chucks and is compatible with all 1/4″ quick-change chucks and Extension, including impact drills.

6. Designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain.

7. Hang hole allows for bit storage & wire pulling

 

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x