1 inch Wood Auger Bit

Hex Shank Extra Long Wood Auger Drill Bit with Screw Point for Wood Deep Hole Drilling

1. Material: Carbon Steel With Heat Treatment
2. Shank: Hex Shank
3. Flute: Single Flute with Stem

4. Head Tip: Single Spur with Screw Point
5. Surface Finish: Black & Bright
6. Package: One Piece in One PVC Pouch, PVC Tube or PVC Double Blister

 

Product Description
More Choice For You: Home > Wood Drill Bit
 Product name Hex Shank Extra Long Wood Auger Drill Bit with Screw Point for Wood Deep Hole Drilling
 Material High Carton Steel With Heat Treatment
 Shank Hex Shank (We Also Have Quick Change Hex Shank, Double R Hex Shank, SDS Plus Shank, Hand Use Shank)
 Flute Single Flute (We Also Have Double Flutes, Three Flutes, and Four Flutes)
 Surface finish Black & Bright (We Also Have Color Painting and Titanium Coated)
 Package One Piece in One PVC Pouch, PVC Tube or PVC Double Blister
 Features 1. Made of high carbon steel with threaded tip.
2. Screw point tip allows bit to self-feed for ease of drilling,fast boring in hard and soft wood.
3. Hex shank provides a better chuck grip and reduces slippage.
4. Without clogging, binding, or stopping to clear chips.
5. Can be used on hand electric drill and bench drill.
Product Size
Diameter Overall Length Diameter Overall Length
mm mm Inch Inch
6-26 100 1/4″-1″ 4″
6-40 125 1/4″-1-9/16″ 5″
6-40 155 1/4″-1-9/16″ 6″
6-40 200 1/4″-1-9/16″ 8″
6-40 230 1/4″-1-9/16″ 9″
6-40 300 1/4″-1-9/16″ 12″
6-40 400 1/4″-1-9/16″ 16″
6-40 460 1/4″-1-9/16″ 18″
6-40 500 1/4″-1-9/16″ 20″
6-40 600 1/4″-1-9/16″ 24″
6-40 800 1/4″-1-9/16″ 32″
6-40 1000 1/4″-1-9/16″ 40″
* Custom-tailor would be available against customers’ requirements

Factory

 

1. Made from high quality, hardened steel for added durability.

2. Hex shank provides better chuck grip and reduces slippage.

3. The extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications.

designed for drilling deep smooth clean holes in wood.

4. The solid center design provides extra rigidity while boring.

5. Screw point tip allows the bit to self-feed for ease of drilling.

6. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips.

7. For use with corded and cordless drills.

Wood Auger Bits – designed for drilling deep smooth clean holes in wood. Screw point at the tip of bit provides better hole location and self feeds bit into the wood for easier drilling. The cutting edges for a rapid cutting act like horizontal cutter and chip out the wood in the hole. Long deep spiral flute for effective chip removal.

 

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x