12mm SDS Drill Bit

SDS Plus Hammer Drill Bit for Concrete Hard Stone Marble Wall

1. Body Material:40Cr Steel with Heat Treatment
2. Tip Material: Tungsten Carbide
3. Process: Milled Flutes and Welded Tip
4. Tip Type: Single Tip
5. Flute Type: S4 Flute, L Flute, U Flute
6. Shank: SDS Plus Shank
7. Surface Finish: Sand Blasted
8. Package: in PVC Pouch, Plastic Box, Individually in Skin Card, Double Blister, Clamshell, Metal Box

 

Product Description
More Choice For You: Home > SDS Hammer Drill Bit

Product Name

SDS Plus Hammer Drill Bit for Concrete Hard Stone Marble Wall
Body Material

40Cr Steel with Heat Treatment

Tip Material Tungsten Carbide
Process Milled Flutes and Welded Tip
Tip Type Cross Tip (We Also Have Single Tip)
Flute Type Double Flute (We Also Have LFlute, U Flute, S4Flute)
Shank SDS Plus Shank (We Also Have SDS Max Shank)
Size 4*110mm to  40*1200mm   (5/32″ * 4″ to 1 3/4″ * 40″)
Surface Finish Sand Blasted
Package

One Piece in One PVC Pouch Or Plastic Hanger or PVC Tube or PVC Double Blister

Feature 1. SDS drill bits are able to chip away brick, tile, mortar, concrete and other tough materials with ease.
2. Double fluted design to enable rapid removal of drilled material.
3. Efficient drilling, work time longer.
4. Tungsten carbide tip can drill into the materials faster.
5. It is suitable for all rotary hammers, mortising hammers or impact drills with SDS-Plus holder.
Product Size
Diameter Flute Length Overall Length Diameter Flute Length Overall Length
mm mm mm Inch Inch Inch
4.0-10.0 50 110 5/32″-3/8″ 2″ 4″
4.0-16.0 100 160 5/32″-5/8″ 4″ 6″
5.0-26.0 150 210 3/16″-1″ 6″ 8″
6.0-26.0 200 260 1/4″-1″ 8″ 10″
6.0-26.0 250 310 1/4″-1″ 10″ 12″
6.0-26.0 290 350 1/4″-1″ 12″ 14″
6.0-26.0 350 410 1/4″-1″ 10″ 12″
8.0-30.0 390 450 5/16″-1-1/8″ 12″ 14″
8.0-30.0 540 600 5/16″-1-1/8″ 14″ 16″
10.0-30.0 740 800 3/8″-1-1/8″ 16″ 18″
10.0-30.0 940 1000 3/8″-1-1/8″ 22″ 24″
10.0-40.0 1140 1200 3/8″-1-3/4″ 24″ 26″
* Custom-tailor would be available against customers’ requirements

Factory

 

1. Premium 40Cr steel with heat treatment improves core strength for maximum durability and extended life.

2. Hardened, premium carbide insert tip is strong and stays sharp longer for finer material break up and easier drilling. increases strength and durability.

3. Copper braze material gives high heat resistance for reduced tip loss, Carbide tip securely embedded in the steel body.

4.fold spiral flute (S4) for rapid drilling dust removal. With even less vibration and more precise guiding, the stability and service life of the drill bit are increased.

 

 

How to Use:

■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.

For your Safety:

We recommends the use of following personal protective equipment:

■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)

Important Note:

Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x